No heat? We'll have it running again tonight.
Furnaces, heat pumps and boilers repaired around the clock — and new systems sized to your home with a real load calculation, not a guess.
- 24/7 no-heat response
- CO safety check on every visit
Signs your heating needs attention.
Most problems give a warning before they leave you cold. If you notice one of these, it's cheaper to call now than at 2 a.m.
Smell of gas or rotten eggsCall now
Leave the house, then call your gas utility and us from outside. Don't flip switches or light anything.
Carbon monoxide alarm soundingCall now
Get everyone outside and call 911. We'll inspect the heat exchanger and venting once it's safe.
No heat at all
Often an ignitor, flame sensor, pressure switch or control board — usually fixed in one visit.
Furnace runs but blows cold air
Could be a dirty flame sensor, gas valve issue or a tripped limit switch from a clogged filter.
Short-cycling on and off
Overheating, an oversized system or a failing thermostat — hard on parts and your bill.
Banging, squealing or rattling
Delayed ignition, a worn blower belt or motor bearing. Small fix now, big repair later.
Uneven rooms, cold upstairs
Ductwork, airflow and zoning issues — we measure, not guess.
Heating bills creeping up
Dirty burners, clogged filters or an aging system losing efficiency every season.
Yellow or flickering flameCall now
Incomplete combustion can mean CO. Turn the system off and call us.
Every kind of heat, one team.
We service and install all major furnace and heat pump brands — including the 20-year-old unit your last company said was "too old to touch."
- Gas & propane furnaces
- Electric furnaces
- Air-source heat pumps
- Hot-water & steam boilers
- Ductless mini-splits
- Radiant floor heat
- Smart & zoned thermostats
- Ductwork & airflow
Included in every heating repair visit
- Full diagnostic of ignition, burners, blower and controls
- Carbon monoxide test at the furnace and in the living space
- Heat exchanger visual inspection for cracks
- Written flat-price options before any work begins
- Filter check and replacement if you have one on hand
- 1-year labor guarantee on the repair
$79 diagnostic, waived when you approve the repair. Free for Comfort Club members.
Honest advice — even when it's "just fix it."
We'd rather earn your next 20 years of service than sell you a furnace you don't need yet.
Usually worth repairing
- Furnace is under 12 years old
- Repair costs less than a third of a new system
- It's the first major repair in several years
- Rooms heat evenly and bills are steady
- Parts are readily available
Time to talk about replacing
- Furnace is 15–20+ years old
- Cracked heat exchanger (a safety issue, not a repair)
- Repairs every season and climbing
- Bills up noticeably year over year
- Rooms that never get comfortable
Our rule of thumb: multiply the age of the system by the repair cost. If that number is over $5,000, it's worth getting a replacement quote — which is always free, with no pressure and no commission.
Sized for your house, not the last one on the truck.
An oversized furnace short-cycles and wears out early; an undersized one runs all day. We measure your home room by room before recommending anything.
- Room-by-room load calculationInsulation, windows and orientation — all factored in.
- Permits, inspection & haul-away includedNo surprise fees on install day.
- Most installs done in one dayHeat back on before dinner.
- 10-year parts & labor warrantyPlus a free first-year tune-up.
What happens after you call.
- 0–15 min
We answer & triage
A dispatcher asks a few questions so the tech brings the right parts. Gas smell? We'll walk you through staying safe.
- Same day
Tech arrives on time
You get a text with their name and photo, and a call when they're 30 minutes away.
- 30–45 min
Diagnose & quote
Full inspection, CO test, then written flat-price options. Nothing starts until you approve.
- Most in 1–2 hrs
Fix, test, tidy up
Repair, run a full heating cycle, check temperatures and leave the area cleaner than we found it.
Questions we hear every winter.
Still unsure? Call (555) 010-2400 and ask a real technician.
How much does a furnace repair cost?
Most common repairs — ignitors, flame sensors, pressure switches, capacitors — fall between $150 and $450 including parts and labor. You'll always see the exact flat price before we start.
My furnace is making a burning smell on the first cold day. Is that normal?
A light dusty smell for the first 15–30 minutes of the season is normal — it's dust burning off the heat exchanger. A strong electrical or plastic smell, or one that doesn't fade, is not: turn the system off and call us.
How often should I change my furnace filter?
Every 1–3 months for standard 1-inch filters, more often with pets. Thicker 4–5 inch media filters usually last 6–12 months. A clogged filter is the #1 cause of the no-heat calls we see.
How long does a furnace last?
Typically 15–20 years with yearly maintenance, closer to 12–15 without. Heat pumps tend to run 12–15 years because they work year-round.
Should I switch to a heat pump?
In many Lakeview homes a heat pump paired with a gas furnace (a "dual-fuel" setup) is the most efficient option. We'll run the numbers for your house during a free estimate.
Do you charge extra for nights and weekends?
There's a modest after-hours fee for non-members, which we'll quote on the phone before dispatching. Total Comfort and Home Complete members never pay it.
Cold house? We're on call right now.
Same-day heating repairs, 24/7 emergency dispatch and a flat price before we start.